|
 
|
Pharmaceutical Inspection Machine |
|
|
We offer Pharmaceutical Inspection Machines such as microprocessor based tablet disintegration machine, tablet friability test apparatus, tablet disintegration tester, tablet inspection machine, digital tablet hardness tester, automated tablet hardness testers. Our infrastructural setup enables us to manufacture flawless pharmaceutical machinery or pharma machinery. We also manufacture as per the bulk requirements.
|
Microprocessor Based Tablet Disintegration MachineModel No – (C- TD-20) We are engaged in the manufacture and supply of the high quality of microprocessor based tablet disintegration machine. we manufacture it with the premium quality raw materials and as per the defined industry standards. Some of the special features of the range are as follows: - Self Validation Of Rpm
- Easy To Use Input Keypad
- Operation By Programme Menu
- 4 Line Lcd Display
- Auto Parking Of The Baskets After The Test Is Over
- Modular Design For 2 Simultaneous Tests
- Real Time Display, Set Ellapse Time, Bath / Beaker Temperature On Screen
- Meets Or Exceeds All Usp/Bp Specifications
- Illuminated Bath For Better Visibility
- Test Printout
- Keyboard Interface
Our product is specially designed for testing the disintegration time threshold for solid dosage medication, as required by usp. It is easy to set up and operate with advanced features. To operate, the lab technician inputs the length of the run (hours to seconds) loads the tablets and presses the start key. This new version offers validation and programming parameters with its new micro-controller. The c-td 20 design allows easy installation and operation of the unit. The c-td 20 is designed to meet the specifications of usp / ip / bp pharmacopoeia. The baskets are automatically parked at the top position at the end of the test and the timer gives an alarm. For the better viewing of the disintegration illumination is provided at the base of the unit. The temperature can be set from 20° c to 50° c and it is controlled by the sensor with an accuracy of ± 0. 3° c. The machine will generate printout which contains date, time, calibration date, and next calibration due date, test start / finish time & online validation of beaker temperature. The temperature can carry out two disintegration test tablets simultaneously. It works on 230 volts single phase a. C 50 hz. Some of the specifications are as follows: - Temperature : 20°C To 50° C
- Accuracy : 0. 3°C
- Resolution : 0. 1° C
- Timer Range 99 Hrs. 59 Min. 59 Sec.
- Stroke: 55Mm, 30 Strokes/Min
- Bath Capacity : 10 Ltrs
- Power : 230 V 50 Hz 110 V 60 Hz (Optional)
- Weight : 27 Kgs
| | | |
| Tablet Friability Test ApparatusModel No – (C- FT-20) Avail from us the superior quality of Tablet Friability Test Apparatus. We manufacture these as per the defined industry standards. We offer the product at the most competitive range. Some of the stringent features are as follows: - Microprocessor control
- Programmable counter
- Side lsoading drums
- Direct reading in %
- Sleek Cabinet
Our machine is specially used to determine the durability of tablets from the time of production to the time use, as it is important to test abrasion and impact hardness of the tablets. The apparatus consist of transparent acrylic drums. The drums are equipped with a plastic blade which carries the tablets along with it upto predetermined height while the drums are rotating and tablets are allowed to slide and let them slide down. The tablets are weight before and after the rubbing in the drum have taken place. The difference in weight indicates the rate of abrasion. The microprocessor fabricator is equipped with Micro-Computer based Digital display system. The touch switches are provided on the front panel of the apparatus for setting the required total number of revolution of the drum which rotates at 25 revolutions per minute. Each revolution from the starting from minimum number 1 to required set number to 9999 is displayed on the window as per pre-setting. An audible alarm sounds alarming the operator that the test over. In this new sophisticated model calculator is not required, as the percentage of the abrasion of the tablets is directly displayed on the front panel by feeding the correct data with the help of programmable touch Switches. Some of the specifications are as follows: | Speed : | 25 RPM | | Accuracy : | 1 RPM | | Counter : | 1 to 9999 revolutions | | No. of Drums : | One or Two as per model | | Display : | 4 Digits LED | | Dimensions : | 26 cm x 20 cm x 25 cm | | Supply : | 230 V / 50 Hz 1 Ph. (Optional 110 V 60 Hz ) | | | |
Tablet Disintegration TesterWe manufacturer and supply the high quality of Tablet Disintegration Testers new TD. Our series represents the very latest in tablet testing technology. We offer these with excellent production techniques combined with modern microprocessor design guarantee the highest standards of performance and reliability. Our all disintegration testers meet the latest specifications as laid down in the European, united states and associated pharmacopoeia. We offer these in two stations (Models TD-20S/D), three stations (Models TD-30S/D) and four test stations (Model TD-40S/D). Select required model to suit application and affordability. Efficient, compact new design allows the user to observe the test better way. Smooth jerk-free almost maintenance-free drive design together with advanced microprocessor based design electronics assures top performance. It is ideal for both R&D and routine quality control applications. The electronic stroke control is provided with its micro-controller based motor drive guarantees an accuracy (better than) of ±1 stroke In new TD series of disintegration testers, the temperature is controlled by means of an internal bath heater. The heater controller/circulation has an accuracy of better than ± 0.2°C thus ensuring a constant and even distribution of heat throughout the bath. The water bath is constructed such a way that the water inside the bath will be circulated properly to maintain even temperature all over the bath without affecting the dissolution. The bath temperature can be constantly monitored using the PT 100 temperature probe provided for this purpose. An external probe is provided to monitor the temperature inside the test beaker. Provision (optional) is made for logging the actual strokes per minute, set temperature and deviation with the set value, at user programmed intervals throughout the test for subsequent printing. The control is provided by a membrane keypad linked to 20X4 backlit LC Display, which together with modular type electronics makes instrument easy to operate and easy to service. New TD series disintegration testers are supports not only normal disintegration also suppository disintegration with optional suppository test basket with tank. Some of the striking features are as follows: -
Complies with all current USP, EP and other. -
Pharmacopoeia Supports 2/3/4 test baskets. -
Compact, user-friendly operation. -
Splash-proof membrane keypad. -
20X4 LCD screen with backlit. -
Quick-release basket design. -
Connectivity with PC compatible key board for feeding product information. -
Selectable type of disintegration normal basket /suppository basket. -
Auto parking of baskets at top position. -
Online validation of strokes per minute. -
External circulation pump. -
Bath illumination for better visibility. -
Validation protocol. -
IQ/OQ Documents. Some of the specifications are as follows: | Display | 20 X 4 line, back-lit LCD | | Stroke per min | 30 SPM ±1 Stroke height: 55mm±2mm | | Temperature Control | Range: 25ºC-40ºC; Accuracy (±0.2ºC) | | Test Duration | 1 min to 99Hrs 59Min 59Sec | | Bath Illumination | 8W CF Lamp | | Power Supply | 230V AC, 50/60Hz, 400VA 110V AC 50/60Hz on request | | External Interface | Optional parallel printer port PC Keyboard | | | | |
| Tablet Inspection MachineWe manufacture and supply the high quality of Tablet Inspection Machines. We manufacture these with the use of the premium quality of raw materials. We offer the range at the industry leading prices. Some of the special features are as follows: -
Visual inspection of tablets -
Upto 1 Lakh tablets per hour can be inspected -
Suitable for tablets for 3mm to 19mm -
Programmable speed level & Vibrator power level -
No noise, easy & simple Operation -
Splash proof control panel -
Facility to operale two foot switches -
Tablet volume indicator - (Optional) -
Magnifying lens for better viewing - (Optional) -
IQ / OQ Documentation We specially design these machines for 100% visual inspection of tablets from both sides and 1, 00,000 tablets per hour can be inspected on this GMP Model by employing 2 operators thereby reducing inspection cost considerably. Our product consists of the stainless steel complete body, S.S Hopper from which tablets fall on a magnetic vibrator that removes chips and dust from the tablets and feed them on 6 inches wide belt for one operator to inspect the other side of the tablets (minimum size of the tablet 3 mm & maximum size of the tablet 19 mm.) We also offer new microprocessor Electronic control panel gives new look and easy Operation. The intensity of the vibration of the vibrator can be varied to ensure smooth falling of tablets on the belt, similarly speed of the belt can also be adjusted so that inspection rate can be increased-decreased depending on the percentage of rejection. Complete body, Hopper, Top cover etc are made of stainless steel. Two foot switches are provided for the operators. Our manufactured machine is suitable for 230 Volts Single Phase, A.C. 50 Hz & as per GMP Standard. Our machine is ideal for visual inspection of medicinal tablets, Ink Tablets, rubber caps, & Confectionary sweets etc. Specifications | Display | LCD display | | Length | 200 cm | | Height | 150 cm | | Width | 50 cm | | Approximate Weight | 475 Kgs | | Net Weight | 320 Kgs | | Motor power | 0.25 HP DC Single Phase | | Size of the belt | 6"width x 69" Length 6"width x 157.5" Length | | | |
Digital Tablet Hardness TesterWe are among the leading names involved in the manufacture and export of the Digital Tablet Hardness Tester. We offer the range at the most reasonable rates. We are widely recognized in the industry for our quality features. Some of the special features are as follows: - Thickness / Diameter and Hardness Measurements from one test
- Stepper motor driven mechanism
- Easy to calibrate. Microcontroller based system with Backlit 2 line Big character LCD Display
- Report generation and printing of report facility, the results are stored and can be printed even after power failure
- User Friendly operations as completely Menu driven with suggested actions Error messages.
- The Campbell's C-DHT 200 Hardness Tester is to test the tablets or cores, sweets etc. The Microprocessor control measurement system provides the versatility and accuracy. All the test results are shown on the digital LCD display and printed on the printer. The hardness range can be checked from 0.5 Kg to 50.0 Kg., N or Kp. A removable tray is attached at the back side of the Machine, the small hand held brush is provided to clean the Sample fragments. The calibration is done by a simple procedure which can be performed at any flat surface with Govt. approved standard weight.
Some of the specifications are as follows: | Model No : | C-DHT 200 | | Hardness Accuracy : | + 0.1 Kg | | Diameter/Thickness Range : | 2.0 - 35.0 mm. | | Measurement Units | - | | Hardness | Kilogram (Kg)
Newtons (N)
Kiloponds (Kp) | | Ramprate : | 3 Degree C per minutes | | Power : | 230 V / 50 Hz 110 V 50/60 Hz (Optional) | | Diameter : | Millimeter (mm) | | Test Method : | Automatic | | Test Data : | Hardness, Diameter, Thickness | | Display : | 2 x 16 Character Backlit LCD all angle Display | | Clock : | Real time Clock | | Memory : | Results of 50 Tablets | | Printer Interface : | Centronics 25 Pin D type Connector | | Printer Support : | 80 col. Dotmarix & Deskjet | | Net Weight : | 12 Kgs. | | Dimension (L x W x H) : | 305 x 305 x 205 (mm | | | | |
| Automated Tablet Hardness TesterModel: - C – WWTDH 500 N We manufacture and supply the Automated Tablet Hardness Tester. Our model C-WWTDH 500 N extends the successful line of manually operated Campbell Electronics Tablet hardness Tester. Our model is capable of measuring sample weight, width, thickness, diameter and hardness. A comprehensive test report is generated automatically as soon as the desired number of samples has been successfully tested. The report shows report Serial number, calibration and calibration due dates, product name, product number, Batch ID, Press side ID, operator ID, test start date and time, tolerance limits, Weight, width, thickness, diameter and hardness, data summary statistics - Unit of measure, samples size Maximum & Minimum data values, data range Sabs, Srel. The functionality of our model can be extended by attaching an external analytical balance. Further, the tester has connections for an external Key board & Printer. Output of results can be made immediately Via-in-line printer or to a central data system Via the RS – 232 interface. Some of the special features are as follows: - Blue Graphic Display
- Easy to operate
- Accurate measuring weight, width, thickness, diameter and hardness
- Precise Tablet Positioning.
- Easy to Calibrate.
- Compatible to any scale.
Units of Measure: The unit of measure can be selected and stored together with the product definition. | Weight | g/mg | | Width | mm/inch | | Thickness | mm/inch | | Diameter | mm/inch | | Hardness | Network/Kp/Sc/UD (User Defined) | External Scale The weight of a tablet can be recorded and correlated to other instrument parameters by attaching on external scale (Any scale-Mettler, Sartorius, Shimatzu etc). Calibration Calibration can be carried out << in- house>> and required only few minutes. The - simple but complete calibration procedure can be carried out at any time using the calibration kit thus eliminating the necessity to return the instrument to the supplier. The date of the calibration and calibration due date automatically documented on each print out. Pass word Protection We provide 3- level password protection to secure instrument parameter settings and instrument log. Tongues for C-WWTDH 500 N Some Tablet shapes require a groove bottom plate in order to prevent them from displacing during the hardness tester. For this application you can order the groove plates as an optional extra. Safety Guard & Collection Tray We provide un-breakable Perspex polycarbonate Guard with Collection tray for broken tablets. Some of the stringent specifications are as follows: | Model No: | C-WWTDH 500N | | Weight | 0-60 g | | Width | 0-10 mm/inch | | Thickness | 0-15 | | Diameter | 0-45 mm | | Hardness | 0-500 N | | Hardness Units | Newtons, Kiloponds, strong Cobb & UD (User Defined) | | Maximum Sample Diameter | 45 mm | | Max no of Samples | 100 | | Input power | 90 v - 270 V AC | | Measurements | L (525 mm) x D (350 mm) x H (200 mm) | | Weight | 25 Kg | | | |
|
